segunda-feira, fevereiro 20, 2006
Transformar Swl 3300AP num cliente de qualquer Access Point !
Primeiro temos que efetuar uma conexão via Hyper Terminal (57600bps), utilizando o cabo console que vem junto com o equipamento. Assim que a conexão estiver estabelecida, pressione Enter, coloque a senha e selecione a opção 02 do menu.
Selecione a opção 6, tenha o arquivo SA-T33173H-0806.bin (439KB), e pressione y por duas vezes.
Digite apfirm e vá na opção enviar arquivo do hyper, selecione o arquivo e coloque o protocolo 1K xmodem.
Agora é só esperar transferir o firmware e reinicia-la.Para ela funcionar é só configurar o SSID.
Não se esqueça, você não consegue mais configurar o endereço ip e ela não trabalha mais em modo Access Point ou Mult Link.
Veja abaixo a cópia das telas:
1) select menu “2”
==========================================
Samsung SWL-3300AP Configuration
==========================================
[ ROOT ]
1. Basic [Menu]
2. Advanced [Menu]
3. Server/Service [Menu]
4. Status [Menu]
5. Load default values
6. Save and reboot
CMD(t,p,h,ping):2
2) select menu “9”
==========================================
Samsung SWL-3300AP Configuration
==========================================
[ Advanced ]
1. Internet Connection [Menu]
2. Wireless [Menu]
3. Bridge [Menu]
4. Access control [Menu]
5. Administration [Menu]
6. Upgrade FW via serial
CMD(t,p,h,ping):6
3) You can see the following messages
AP Firmware can be upgraded via serial using 1k-xmodem protocol.
Power must be always on during the upgrade.
Do you really want to upgrade the firmware via serial ? (y/n):y
Do you really want (y/n)?y
#######################################
AP will enter into the FIMWARE UPGRADE MODE
#######################################
==========================================
Boot firmware
(SST flash memory,0xBF)
2001.10.26
==========================================
Type command([go]: normal operating or [help]: help)
CMD:
4) type “apfirm”
==========================================
Boot firmware
(SST flash memory,0xBF)
2001.10.26
==========================================
Type command([go]: normal operating or [help]: help)
AP firmware update!!
Start address : 0x10000
Please download the firmware using 1K-Xmodem!
5) Select [Transfer] – [Send File…] menu at HyperTerminal
6) click [Browse..] and select the SA firmware and select “Protocol” as “1K Xmodem”.
And then, click [Send] button.
7) After the following message, type “y”
Downloading OK !
size=450560
Board will be restarted, automatically
Wait for LED Blinkig !!
AP Model is mismatched!!
AP manufacture =SAMSUNG
AP model =SWL-3300SA(HW)
AP firmware version =1.73
Date =2002. 08. 05
Please, Make sure your firmware !
Anyhow, If you want to update this firmware, then press 'y'._
8) After flashing, you can see the following “SA” menu
AP/RG Firmware version : 1.73
Checksum OK
Loading firmware
==========================================
Samsung SWL-3300SA Configuration
==========================================
[ ROOT ]
1. Basic [Menu]
2. Advanced [Menu]
3. Status [Menu]
4. Load default values
5. Save and reboot
CMD(t,p,h,ping):
9) Specify the “ESSID” at the “1. Basic” menu and the “5. Save and reboot”
Fonte: HENRIQUE CARMINE
Selecione a opção 6, tenha o arquivo SA-T33173H-0806.bin (439KB), e pressione y por duas vezes.
Digite apfirm e vá na opção enviar arquivo do hyper, selecione o arquivo e coloque o protocolo 1K xmodem.
Agora é só esperar transferir o firmware e reinicia-la.Para ela funcionar é só configurar o SSID.
Não se esqueça, você não consegue mais configurar o endereço ip e ela não trabalha mais em modo Access Point ou Mult Link.
Veja abaixo a cópia das telas:
1) select menu “2”
==========================================
Samsung SWL-3300AP Configuration
==========================================
[ ROOT ]
1. Basic [Menu]
2. Advanced [Menu]
3. Server/Service [Menu]
4. Status [Menu]
5. Load default values
6. Save and reboot
CMD(t,p,h,ping):2
2) select menu “9”
==========================================
Samsung SWL-3300AP Configuration
==========================================
[ Advanced ]
1. Internet Connection [Menu]
2. Wireless [Menu]
3. Bridge [Menu]
4. Access control [Menu]
5. Administration [Menu]
6. Upgrade FW via serial
CMD(t,p,h,ping):6
3) You can see the following messages
AP Firmware can be upgraded via serial using 1k-xmodem protocol.
Power must be always on during the upgrade.
Do you really want to upgrade the firmware via serial ? (y/n):y
Do you really want (y/n)?y
#######################################
AP will enter into the FIMWARE UPGRADE MODE
#######################################
==========================================
Boot firmware
(SST flash memory,0xBF)
2001.10.26
==========================================
Type command([go]: normal operating or [help]: help)
CMD:
4) type “apfirm”
==========================================
Boot firmware
(SST flash memory,0xBF)
2001.10.26
==========================================
Type command([go]: normal operating or [help]: help)
AP firmware update!!
Start address : 0x10000
Please download the firmware using 1K-Xmodem!
5) Select [Transfer] – [Send File…] menu at HyperTerminal
6) click [Browse..] and select the SA firmware and select “Protocol” as “1K Xmodem”.
And then, click [Send] button.
7) After the following message, type “y”
Downloading OK !
size=450560
Board will be restarted, automatically
Wait for LED Blinkig !!
AP Model is mismatched!!
AP manufacture =SAMSUNG
AP model =SWL-3300SA(HW)
AP firmware version =1.73
Date =2002. 08. 05
Please, Make sure your firmware !
Anyhow, If you want to update this firmware, then press 'y'._
8) After flashing, you can see the following “SA” menu
AP/RG Firmware version : 1.73
Checksum OK
Loading firmware
==========================================
Samsung SWL-3300SA Configuration
==========================================
[ ROOT ]
1. Basic [Menu]
2. Advanced [Menu]
3. Status [Menu]
4. Load default values
5. Save and reboot
CMD(t,p,h,ping):
9) Specify the “ESSID” at the “1. Basic” menu and the “5. Save and reboot”
Fonte: HENRIQUE CARMINE
